Siemens Converter
Convert Siemens to Statohm Centimeter and more • 68 conversions
0
Unit Explanations
SiemensS
Source UnitThe siemens (symbol: S) is the SI unit of electrical conductance, defined as the reciprocal of resistance in ohms. One siemens is equivalent to one ampere per volt, which can be expressed as S = A/V. This unit is used to measure how easily electricity can flow through a material or circuit. The siemens is a derived unit, belonging to the International System of Units (SI), and was adopted in 1960 during the 11th General Conference on Weights and Measures. It is named after the German inventor and electrical engineer Werner von Siemens, who made significant contributions to the development of electrical engineering.
Current Use
Today, the siemens is widely utilized across various industries for measuring electrical conductance. It is an essential unit in electrical engineering, especially in the design and analysis of circuits. The telecommunications industry employs siemens to assess the conductance of transmission lines and cables, ensuring efficient signal transmission. In the field of electronics, components such as resistors, capacitors, and inductors are evaluated using siemens to determine their behavior in circuits. Furthermore, in the realm of materials science, researchers use this unit to characterize the electrical properties of materials, aiding in the development of conductive materials for various applications. Countries worldwide, including the USA, Germany, and Japan, utilize the siemens in both educational and professional settings, reinforcing its importance in global electrical engineering practices.
Fun Fact
The symbol for siemens, 'S', is a tribute to the inventor Werner von Siemens.
Statohm CentimeterstΩ·cm
Target UnitThe statohm centimeter, abbreviated as stΩ·cm, is a derived unit of electrical resistance in the centimeter-gram-second (CGS) system of units. It expresses the resistance of a conductor in terms of the statohm, which is defined as the resistance between two points in a conductor when a constant potential difference of one electrostatic unit causes a unit current to flow. The inclusion of 'centimeter' signifies the length scale, making it particularly useful in specific applications like electromagnetism and electrical engineering. The statohm centimeter is particularly relevant in contexts where one deals with electromagnetic phenomena in a vacuum or near vacuum and is a crucial parameter in characterizing materials in low-voltage or high-frequency applications, providing insight into their conductive properties.
Current Use
Today, the statohm centimeter is primarily used in specialized scientific and engineering contexts, particularly in fields such as electromagnetism, materials science, and electrical engineering. It is commonly applied in the study of electrical properties of materials at the microscopic level, where traditional SI units may not provide sufficient granularity. Industries such as telecommunications, semiconductor manufacturing, and academic research often utilize this unit when examining the behavior of conductive materials under varying environmental conditions. Countries that heavily engage in scientific research, such as the United States, Germany, and Japan, frequently employ the statohm centimeter in laboratory settings for precise measurements. Its application extends to the evaluation of electrical resistance in nanoelectronics, where understanding the scale of resistance in materials becomes critical for developing advanced technologies.
Fun Fact
The statohm centimeter is used predominantly in theoretical physics and specialized engineering fields.
All Electric Conversions
101 convertersPopular Conversions
📐Conversion Formula
= × 1.00000How to Convert
To convert to , multiply the value by 1.00000. This conversion factor represents the ratio between these two units.
Quick Examples
💡 Pro Tip: For the reverse conversion ( → ), divide by the conversion factor instead of multiplying.
Siemens
electric • SI Unit
Definition
The siemens (symbol: S) is the SI unit of electrical conductance, defined as the reciprocal of resistance in ohms. One siemens is equivalent to one ampere per volt, which can be expressed as S = A/V. This unit is used to measure how easily electricity can flow through a material or circuit. The siemens is a derived unit, belonging to the International System of Units (SI), and was adopted in 1960 during the 11th General Conference on Weights and Measures. It is named after the German inventor and electrical engineer Werner von Siemens, who made significant contributions to the development of electrical engineering.
History & Origin
The concept of electrical conductance dates back to the early experiments with electricity, particularly in the 19th century. The formal definition and measurement of conductance emerged as researchers like Georg Simon Ohm established the relationship between voltage, current, and resistance. Ohm's Law (V = IR) laid the groundwork for understanding electrical circuits. The need for a standardized unit came as electrical systems became more complex, and the importance of conductance in circuit design and analysis increased. The siemens was introduced as a unit of conductance to formalize this aspect of electrical engineering.
Etymology: The term 'siemens' is derived from the name of Werner von Siemens, a prominent figure in the field of electrical engineering, reflecting his significant contributions to the development of electrical systems and technology.
Current Use
Today, the siemens is widely utilized across various industries for measuring electrical conductance. It is an essential unit in electrical engineering, especially in the design and analysis of circuits. The telecommunications industry employs siemens to assess the conductance of transmission lines and cables, ensuring efficient signal transmission. In the field of electronics, components such as resistors, capacitors, and inductors are evaluated using siemens to determine their behavior in circuits. Furthermore, in the realm of materials science, researchers use this unit to characterize the electrical properties of materials, aiding in the development of conductive materials for various applications. Countries worldwide, including the USA, Germany, and Japan, utilize the siemens in both educational and professional settings, reinforcing its importance in global electrical engineering practices.
💡 Fun Facts
- •The symbol for siemens, 'S', is a tribute to the inventor Werner von Siemens.
- •The siemens was introduced as an SI unit to standardize conductance measurements.
- •Conductance is the reciprocal of resistance, making siemens an essential unit in circuit analysis.
📏 Real-World Examples
🔗 Related Units
Statohm Centimeter
electric • Non-SI
Definition
The statohm centimeter, abbreviated as stΩ·cm, is a derived unit of electrical resistance in the centimeter-gram-second (CGS) system of units. It expresses the resistance of a conductor in terms of the statohm, which is defined as the resistance between two points in a conductor when a constant potential difference of one electrostatic unit causes a unit current to flow. The inclusion of 'centimeter' signifies the length scale, making it particularly useful in specific applications like electromagnetism and electrical engineering. The statohm centimeter is particularly relevant in contexts where one deals with electromagnetic phenomena in a vacuum or near vacuum and is a crucial parameter in characterizing materials in low-voltage or high-frequency applications, providing insight into their conductive properties.
History & Origin
The statohm centimeter originated from the need to express electrical resistance in the CGS system, which was developed in the late 19th century as a response to inconsistencies in the earlier metric systems. The CGS system was founded to facilitate scientific communication and standardize measurements in physics and engineering. The statohm, as a unit of resistance, was derived from the electrostatic unit of charge, further linking it to fundamental physical constants. The adoption of the statohm centimeter was pivotal for experiments in electromagnetism, particularly during the rise of electrical engineering as a discipline in the early 20th century.
Etymology: The term 'statohm' combines 'stato-', from the Greek 'statikos' meaning 'static', and 'ohm', named after the German physicist Georg Simon Ohm, who formulated Ohm's law.
Current Use
Today, the statohm centimeter is primarily used in specialized scientific and engineering contexts, particularly in fields such as electromagnetism, materials science, and electrical engineering. It is commonly applied in the study of electrical properties of materials at the microscopic level, where traditional SI units may not provide sufficient granularity. Industries such as telecommunications, semiconductor manufacturing, and academic research often utilize this unit when examining the behavior of conductive materials under varying environmental conditions. Countries that heavily engage in scientific research, such as the United States, Germany, and Japan, frequently employ the statohm centimeter in laboratory settings for precise measurements. Its application extends to the evaluation of electrical resistance in nanoelectronics, where understanding the scale of resistance in materials becomes critical for developing advanced technologies.
💡 Fun Facts
- •The statohm centimeter is used predominantly in theoretical physics and specialized engineering fields.
- •In the CGS system, the statohm is defined based on electrostatic units, making it unique compared to SI units.
- •The term 'statohm' was first introduced in the late 19th century, highlighting the era's advancements in electrical theory.
📏 Real-World Examples
🔗 Related Units
Related Electric Conversions
Explore more electric conversions for your calculations.
Frequently Asked Questions
How do I convert to ?▼
To convert to , multiply your value by 1. For example, 10 equals 10 .
What is the formula for to conversion?▼
The formula is: = × 1. This conversion factor is based on international standards.
Is this to converter accurate?▼
Yes! MetricConv uses internationally standardized conversion factors from organizations like NIST and ISO. Our calculations support up to 15 decimal places of precision, making it suitable for scientific, engineering, and everyday calculations.
Can I convert back to ?▼
Absolutely! You can use the swap button (⇄) in the converter above to reverse the conversion direction, or visit our to converter.